Module netmiko.zyxel
Expand source code
from netmiko.zyxel.zyxel_ssh import ZyxelSSH
__all__ = ["ZyxelSSH"]
Sub-modules
netmiko.zyxel.zyxel_ssh
Classes
class ZyxelSSH (ip: str = '', host: str = '', username: str = '', password: Optional[str] = None, secret: str = '', port: Optional[int] = None, device_type: str = '', verbose: bool = False, global_delay_factor: float = 1.0, global_cmd_verify: Optional[bool] = None, use_keys: bool = False, key_file: Optional[str] = None, pkey: Optional[paramiko.pkey.PKey] = None, passphrase: Optional[str] = None, disabled_algorithms: Optional[Dict[str, Any]] = None, disable_sha2_fix: bool = False, allow_agent: bool = False, ssh_strict: bool = False, system_host_keys: bool = False, alt_host_keys: bool = False, alt_key_file: str = '', ssh_config_file: Optional[str] = None, conn_timeout: int = 10, auth_timeout: Optional[int] = None, banner_timeout: int = 15, blocking_timeout: int = 20, timeout: int = 100, session_timeout: int = 60, read_timeout_override: Optional[float] = None, keepalive: int = 0, default_enter: Optional[str] = None, response_return: Optional[str] = None, serial_settings: Optional[Dict[str, Any]] = None, fast_cli: bool = True, session_log: Optional[SessionLog] = None, session_log_record_writes: bool = False, session_log_file_mode: str = 'write', allow_auto_change: bool = False, encoding: str = 'utf-8', sock: Optional[socket.socket] = None, sock_telnet: Optional[Dict[str, Any]] = None, auto_connect: bool = True, delay_factor_compat: bool = False, disable_lf_normalization: bool = False)
-
Class for platforms that have no enable mode.
Netmiko translates the meaning of "enable" mode to be a proxy for "can go into config mode". In other words, that you ultimately have privileges to execute configuration changes.
The expectation on platforms that have no method for elevating privileges is that the standard default privileges allow configuration changes.
Consequently check_enable_mode returns True by default for platforms that don't explicitly support enable mode.
Initialize attributes for establishing connection to target device. :param ip: IP address of target device. Not required if <code>host</code> is provided. :param host: Hostname of target device. Not required if <code>ip</code> is provided. :param username: Username to authenticate against target device if required. :param password: Password to authenticate against target device if required. :param secret: The enable password if target device requires one. :param port: The destination port used to connect to the target device. :param device_type: Class selection based on device type. :param verbose: Enable additional messages to standard output. :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1). :param use_keys: Connect to target device using SSH keys. :param key_file: Filename path of the SSH key file to use. :param pkey: SSH key object to use. :param passphrase: Passphrase to use for encrypted key; password will be used for key decryption if not specified. :param disabled_algorithms: Dictionary of SSH algorithms to disable. Refer to the Paramiko documentation for a description of the expected format. :param disable_sha2_fix: Boolean that fixes Paramiko issue with missing server-sig-algs <https://github.com/paramiko/paramiko/issues/1961> (default: False) :param allow_agent: Enable use of SSH key-agent. :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which means unknown SSH host keys will be accepted). :param system_host_keys: Load host keys from the users known_hosts file. :param alt_host_keys: If <code>True</code> host keys will be loaded from the file specified in alt_key_file. :param alt_key_file: SSH host key file to use (if alt_host_keys=True). :param ssh_config_file: File name of OpenSSH configuration file. :param conn_timeout: TCP connection timeout. :param session_timeout: Set a timeout for parallel requests. :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response. :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko). :param read_timeout_override: Set a timeout that will override the default read_timeout of both send_command and send_command_timing. This is useful for 3rd party libraries where directly accessing method arguments might be impractical. :param keepalive: Send SSH keepalive packets at a specific interval, in seconds. Currently defaults to 0, for backwards compatibility (it will not attempt to keep the connection alive). :param default_enter: Character(s) to send to correspond to enter key (default:
).
:param response_return: Character(s) to use in normalized return data to represent enter key (default:
)
:param serial_settings: Dictionary of settings for use with serial port (pySerial). :param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor to select smallest of global and specific. Sets default global_delay_factor to .1 (default: True) :param session_log: File path, SessionLog object, or BufferedIOBase subclass object to write the session log to. :param session_log_record_writes: The session log generally only records channel reads due to eliminate command duplication due to command echo. You can enable this if you want to record both channel reads and channel writes in the log (default: False). :param session_log_file_mode: "write" or "append" for session_log file mode (default: "write") :param allow_auto_change: Allow automatic configuration changes for terminal settings. (default: False) :param encoding: Encoding to be used when writing bytes to the output channel. (default: "utf-8") :param sock: An open socket or socket-like object (such as a <code>.Channel</code>) to use for communication to the target host (default: None). :param sock_telnet: A dictionary of telnet socket parameters (SOCKS proxy). See telnet_proxy.py code for details. :param global_cmd_verify: Control whether command echo verification is enabled or disabled (default: None). Global attribute takes precedence over function <code>cmd\_verify</code> argument. Value of <code>None</code> indicates to use function <code>cmd\_verify</code> argument. :param auto_connect: Control whether Netmiko automatically establishes the connection as part of the object creation (default: True). :param delay_factor_compat: Set send_command and send_command_timing back to using Netmiko 3.x behavior for delay_factor/global_delay_factor/max_loops. This argument will be eliminated in Netmiko 5.x (default: False). :param disable_lf_normalization: Disable Netmiko's linefeed normalization behavior (default: False)
Expand source code
class ZyxelSSH(NoEnable, NoConfig, CiscoSSHConnection): def disable_paging(self, *args: Any, **kwargs: Any) -> str: """No paging on Zyxel""" return "" def send_config_set( self, config_commands: Union[str, Sequence[str], Iterator[str], TextIO, None] = None, exit_config_mode: bool = False, enter_config_mode: bool = False, **kwargs: Any ) -> str: """No config mode on Zyxel""" return super().send_config_set( config_commands=config_commands, exit_config_mode=exit_config_mode, enter_config_mode=enter_config_mode, **kwargs ) def session_preparation(self) -> None: super().session_preparation() # Zyxel switches output ansi codes self.ansi_escape_codes = True
Ancestors
Methods
def disable_paging(self, *args: Any, **kwargs: Any) ‑> str
-
No paging on Zyxel
Expand source code
def disable_paging(self, *args: Any, **kwargs: Any) -> str: """No paging on Zyxel""" return ""
def send_config_set(self, config_commands: Union[str, Sequence[str], Iterator[str], TextIO, ForwardRef(None)] = None, exit_config_mode: bool = False, enter_config_mode: bool = False, **kwargs: Any) ‑> str
-
No config mode on Zyxel
Expand source code
def send_config_set( self, config_commands: Union[str, Sequence[str], Iterator[str], TextIO, None] = None, exit_config_mode: bool = False, enter_config_mode: bool = False, **kwargs: Any ) -> str: """No config mode on Zyxel""" return super().send_config_set( config_commands=config_commands, exit_config_mode=exit_config_mode, enter_config_mode=enter_config_mode, **kwargs )
Inherited members
CiscoSSHConnection
:check_config_mode
check_enable_mode
cleanup
clear_buffer
commit
config_mode
disconnect
enable
establish_connection
exit_config_mode
exit_enable_mode
find_prompt
is_alive
normalize_cmd
normalize_linefeeds
paramiko_cleanup
read_channel
read_channel_timing
read_until_pattern
read_until_prompt
read_until_prompt_or_pattern
run_ttp
save_config
select_delay_factor
send_command
send_command_expect
send_command_timing
send_config_from_file
send_multiline
session_preparation
set_base_prompt
set_terminal_width
special_login_handler
strip_ansi_escape_codes
strip_backspaces
strip_command
strip_prompt
telnet_login
write_channel