Module netmiko.mellanox

Expand source code 
from netmiko.mellanox.mellanox_mlnxos_ssh import MellanoxMlnxosSSH

__all__ = ["MellanoxMlnxosSSH"]

Sub-modules

netmiko.mellanox.mellanox_mlnxos_ssh

Mellanox MLNX-OS Switch support.

Classes

class MellanoxMlnxosSSH (ip: str = '', host: str = '', username: str = '', password: Optional[str] = None, secret: str = '', port: Optional[int] = None, device_type: str = '', verbose: bool = False, global_delay_factor: float = 1.0, global_cmd_verify: Optional[bool] = None, use_keys: bool = False, key_file: Optional[str] = None, pkey: Optional[paramiko.pkey.PKey] = None, passphrase: Optional[str] = None, disabled_algorithms: Optional[Dict[str, Any]] = None, disable_sha2_fix: bool = False, allow_agent: bool = False, ssh_strict: bool = False, system_host_keys: bool = False, alt_host_keys: bool = False, alt_key_file: str = '', ssh_config_file: Optional[str] = None, conn_timeout: int = 10, auth_timeout: Optional[int] = None, banner_timeout: int = 15, blocking_timeout: int = 20, timeout: int = 100, session_timeout: int = 60, read_timeout_override: Optional[float] = None, keepalive: int = 0, default_enter: Optional[str] = None, response_return: Optional[str] = None, serial_settings: Optional[Dict[str, Any]] = None, fast_cli: bool = True, session_log: Optional[SessionLog] = None, session_log_record_writes: bool = False, session_log_file_mode: str = 'write', allow_auto_change: bool = False, encoding: str = 'utf-8', sock: Optional[socket.socket] = None, sock_telnet: Optional[Dict[str, Any]] = None, auto_connect: bool = True, delay_factor_compat: bool = False, disable_lf_normalization: bool = False)

Mellanox MLNX-OS Switch support.

    Initialize attributes for establishing connection to target device.

    :param ip: IP address of target device. Not required if <code>host</code> is
        provided.

    :param host: Hostname of target device. Not required if <code>ip</code> is
            provided.

    :param username: Username to authenticate against target device if
            required.

    :param password: Password to authenticate against target device if
            required.

    :param secret: The enable password if target device requires one.

    :param port: The destination port used to connect to the target
            device.

    :param device_type: Class selection based on device type.

    :param verbose: Enable additional messages to standard output.

    :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1).

    :param use_keys: Connect to target device using SSH keys.

    :param key_file: Filename path of the SSH key file to use.

    :param pkey: SSH key object to use.

    :param passphrase: Passphrase to use for encrypted key; password will be used for key
            decryption if not specified.

    :param disabled_algorithms: Dictionary of SSH algorithms to disable. Refer to the Paramiko
            documentation for a description of the expected format.

    :param disable_sha2_fix: Boolean that fixes Paramiko issue with missing server-sig-algs
        <https://github.com/paramiko/paramiko/issues/1961> (default: False)

    :param allow_agent: Enable use of SSH key-agent.

    :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which
            means unknown SSH host keys will be accepted).

    :param system_host_keys: Load host keys from the users known_hosts file.

    :param alt_host_keys: If <code>True</code> host keys will be loaded from the file specified in
            alt_key_file.

    :param alt_key_file: SSH host key file to use (if alt_host_keys=True).

    :param ssh_config_file: File name of OpenSSH configuration file.

    :param conn_timeout: TCP connection timeout.

    :param session_timeout: Set a timeout for parallel requests.

    :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response.

    :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko).

    :param read_timeout_override: Set a timeout that will override the default read_timeout
            of both send_command and send_command_timing. This is useful for 3rd party
            libraries where directly accessing method arguments might be impractical.

    :param keepalive: Send SSH keepalive packets at a specific interval, in seconds.
            Currently defaults to 0, for backwards compatibility (it will not attempt
            to keep the connection alive).

    :param default_enter: Character(s) to send to correspond to enter key (default:

).

    :param response_return: Character(s) to use in normalized return data to represent
            enter key (default:

)

    :param serial_settings: Dictionary of settings for use with serial port (pySerial).

    :param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor
            to select smallest of global and specific. Sets default global_delay_factor to .1
            (default: True)

    :param session_log: File path, SessionLog object, or BufferedIOBase subclass object
            to write the session log to.

    :param session_log_record_writes: The session log generally only records channel reads due
            to eliminate command duplication due to command echo. You can enable this if you
            want to record both channel reads and channel writes in the log (default: False).

    :param session_log_file_mode: "write" or "append" for session_log file mode
            (default: "write")

    :param allow_auto_change: Allow automatic configuration changes for terminal settings.
            (default: False)

    :param encoding: Encoding to be used when writing bytes to the output channel.
            (default: "utf-8")

    :param sock: An open socket or socket-like object (such as a <code>.Channel</code>) to use for
            communication to the target host (default: None).

    :param sock_telnet: A dictionary of telnet socket parameters (SOCKS proxy). See
            telnet_proxy.py code for details.

    :param global_cmd_verify: Control whether command echo verification is enabled or disabled
            (default: None). Global attribute takes precedence over function <code>cmd\_verify</code>
            argument. Value of <code>None</code> indicates to use function <code>cmd\_verify</code> argument.

    :param auto_connect: Control whether Netmiko automatically establishes the connection as
            part of the object creation (default: True).

    :param delay_factor_compat: Set send_command and send_command_timing back to using Netmiko
            3.x behavior for delay_factor/global_delay_factor/max_loops. This argument will be
            eliminated in Netmiko 5.x (default: False).

    :param disable_lf_normalization: Disable Netmiko's linefeed normalization behavior
            (default: False)
Expand source code 
class MellanoxMlnxosSSH(CiscoSSHConnection):
    """Mellanox MLNX-OS Switch support."""

    def enable(
        self,
        cmd: str = "enable",
        pattern: str = "#",
        enable_pattern: Optional[str] = None,
        check_state: bool = True,
        re_flags: int = re.IGNORECASE,
    ) -> str:
        """Enter into enable mode."""

        output = ""
        if check_state and self.check_enable_mode():
            return output

        self.write_channel(self.normalize_cmd(cmd))
        output += self.read_until_prompt_or_pattern(
            pattern=pattern, re_flags=re_flags, read_entire_line=True
        )
        if not self.check_enable_mode():
            raise ValueError("Failed to enter enable mode.")
        return output

    def config_mode(
        self,
        config_command: str = "config term",
        pattern: str = r"\#",
        re_flags: int = 0,
    ) -> str:
        return super().config_mode(
            config_command=config_command, pattern=pattern, re_flags=re_flags
        )

    def check_config_mode(
        self,
        check_string: str = "(config",
        pattern: str = r"#",
        force_regex: bool = False,
    ) -> bool:
        return super().check_config_mode(check_string=check_string, pattern=pattern)

    def disable_paging(
        self,
        command: str = "no cli session paging enable",
        delay_factor: Optional[float] = None,
        cmd_verify: bool = True,
        pattern: Optional[str] = None,
    ) -> str:
        return super().disable_paging(
            command=command,
            delay_factor=delay_factor,
            cmd_verify=cmd_verify,
            pattern=pattern,
        )

    def exit_config_mode(self, exit_config: str = "exit", pattern: str = "#") -> str:
        """Mellanox does not support a single command to completely exit configuration mode.

        Consequently, need to keep checking and sending "exit".
        """
        output = ""
        check_count = 12
        while check_count >= 0:
            if self.check_config_mode():
                self.write_channel(self.normalize_cmd(exit_config))
                output += self.read_until_pattern(pattern=pattern)
            else:
                break
            check_count -= 1

        # One last check for whether we successfully exited config mode
        if self.check_config_mode():
            raise ValueError("Failed to exit configuration mode")

        log.debug(f"exit_config_mode: {output}")
        return output

    def save_config(
        self,
        cmd: str = "configuration write",
        confirm: bool = False,
        confirm_response: str = "",
    ) -> str:
        """Save Config on Mellanox devices Enters and Leaves Config Mode"""
        output = self.enable()
        output += self.config_mode()
        output += self._send_command_str(cmd)
        output += self.exit_config_mode()
        return output

Ancestors

Methods

def enable(self, cmd: str = 'enable', pattern: str = '#', enable_pattern: Optional[str] = None, check_state: bool = True, re_flags: int = re.IGNORECASE) ‑> str

Enter into enable mode.

Expand source code 
def enable(
    self,
    cmd: str = "enable",
    pattern: str = "#",
    enable_pattern: Optional[str] = None,
    check_state: bool = True,
    re_flags: int = re.IGNORECASE,
) -> str:
    """Enter into enable mode."""

    output = ""
    if check_state and self.check_enable_mode():
        return output

    self.write_channel(self.normalize_cmd(cmd))
    output += self.read_until_prompt_or_pattern(
        pattern=pattern, re_flags=re_flags, read_entire_line=True
    )
    if not self.check_enable_mode():
        raise ValueError("Failed to enter enable mode.")
    return output
def exit_config_mode(self, exit_config: str = 'exit', pattern: str = '#') ‑> str

Mellanox does not support a single command to completely exit configuration mode.

Consequently, need to keep checking and sending "exit".

Expand source code 
def exit_config_mode(self, exit_config: str = "exit", pattern: str = "#") -> str:
    """Mellanox does not support a single command to completely exit configuration mode.

    Consequently, need to keep checking and sending "exit".
    """
    output = ""
    check_count = 12
    while check_count >= 0:
        if self.check_config_mode():
            self.write_channel(self.normalize_cmd(exit_config))
            output += self.read_until_pattern(pattern=pattern)
        else:
            break
        check_count -= 1

    # One last check for whether we successfully exited config mode
    if self.check_config_mode():
        raise ValueError("Failed to exit configuration mode")

    log.debug(f"exit_config_mode: {output}")
    return output
def save_config(self, cmd: str = 'configuration write', confirm: bool = False, confirm_response: str = '') ‑> str

Save Config on Mellanox devices Enters and Leaves Config Mode

Expand source code 
def save_config(
    self,
    cmd: str = "configuration write",
    confirm: bool = False,
    confirm_response: str = "",
) -> str:
    """Save Config on Mellanox devices Enters and Leaves Config Mode"""
    output = self.enable()
    output += self.config_mode()
    output += self._send_command_str(cmd)
    output += self.exit_config_mode()
    return output

Inherited members