Module netmiko.cisco.cisco_ios

Expand source code 
from typing import Any, Optional, Callable, Type
from types import TracebackType
import time
import re
import os
import hashlib
import io

from netmiko.cisco_base_connection import CiscoBaseConnection, CiscoFileTransfer
from netmiko.base_connection import BaseConnection


class CiscoIosBase(CiscoBaseConnection):
    """Common Methods for IOS (both SSH and telnet)."""

    def session_preparation(self) -> None:
        """Prepare the session after the connection has been established."""
        cmd = "terminal width 511"
        self.set_terminal_width(command=cmd, pattern=cmd)
        self.disable_paging()
        self.set_base_prompt()

    def set_base_prompt(
        self,
        pri_prompt_terminator: str = "#",
        alt_prompt_terminator: str = ">",
        delay_factor: float = 1.0,
        pattern: Optional[str] = None,
    ) -> str:
        """
        Cisco IOS/IOS-XE abbreviates the prompt at 20-chars in config mode.

        Consequently, abbreviate the base_prompt
        """
        base_prompt = super().set_base_prompt(
            pri_prompt_terminator=pri_prompt_terminator,
            alt_prompt_terminator=alt_prompt_terminator,
            delay_factor=delay_factor,
            pattern=pattern,
        )
        self.base_prompt = base_prompt[:16]
        return self.base_prompt

    def check_config_mode(
        self,
        check_string: str = ")#",
        pattern: str = r"[>#]",
        force_regex: bool = False,
    ) -> bool:
        """
        Checks if the device is in configuration mode or not.

        Cisco IOS devices abbreviate the prompt at 20 chars in config mode
        """
        return super().check_config_mode(check_string=check_string, pattern=pattern)

    def save_config(
        self, cmd: str = "write mem", confirm: bool = False, confirm_response: str = ""
    ) -> str:
        """Saves Config Using Copy Run Start"""
        return super().save_config(
            cmd=cmd, confirm=confirm, confirm_response=confirm_response
        )


class CiscoIosSSH(CiscoIosBase):
    """Cisco IOS SSH driver."""

    pass


class CiscoIosTelnet(CiscoIosBase):
    """Cisco IOS Telnet driver."""

    pass


class CiscoIosSerial(CiscoIosBase):
    """Cisco IOS Serial driver."""

    pass


class CiscoIosFileTransfer(CiscoFileTransfer):
    """Cisco IOS SCP File Transfer driver."""

    pass


class InLineTransfer(CiscoIosFileTransfer):
    """Use TCL on Cisco IOS to directly transfer file."""

    def __init__(
        self,
        ssh_conn: BaseConnection,
        source_file: str = "",
        dest_file: str = "",
        file_system: Optional[str] = None,
        direction: str = "put",
        source_config: Optional[str] = None,
        socket_timeout: float = 10.0,
        progress: Optional[Callable[..., Any]] = None,
        progress4: Optional[Callable[..., Any]] = None,
        hash_supported: bool = True,
    ) -> None:

        if not dest_file:
            raise ValueError(
                "Destination file must be specified for InlineTransfer operations."
            )
        if hash_supported is False:
            raise ValueError("hash_supported=False is not supported for InLineTransfer")

        if source_file and source_config:
            msg = "Invalid call to InLineTransfer both source_file and source_config specified."
            raise ValueError(msg)
        if direction != "put":
            raise ValueError("Only put operation supported by InLineTransfer.")

        if progress is not None or progress4 is not None:
            raise NotImplementedError(
                "Progress bar is not supported on inline transfers."
            )
        else:
            self.progress = progress
            self.progress4 = progress4

        self.ssh_ctl_chan = ssh_conn
        self.source_file = source_file
        if source_file:
            self.source_config = None
            self.source_md5 = self.file_md5(source_file)
            self.file_size = os.stat(source_file).st_size
        elif source_config:
            self.source_config = source_config
            self.source_md5 = self.config_md5(source_config)
            self.file_size = len(source_config.encode("UTF-8"))
        self.dest_file = dest_file
        self.direction = direction

        if not file_system:
            self.file_system = self.ssh_ctl_chan._autodetect_fs()
        else:
            self.file_system = file_system

        self.socket_timeout = socket_timeout

    @staticmethod
    def _read_file(file_name: str) -> str:
        with io.open(file_name, "rt", encoding="utf-8") as f:
            return f.read()

    @staticmethod
    def _tcl_newline_rationalize(tcl_string: str) -> str:
        r"""
        When using put inside a TCL {} section the newline is considered a new TCL
        statement and causes a missing curly-brace message. Convert "\n" to "\r". TCL
        will convert the "\r" to a "\n" i.e. you will see a "\n" inside the file on the
        Cisco IOS device.
        """
        NEWLINE = r"\n"
        CARRIAGE_RETURN = r"\r"
        tmp_string = re.sub(NEWLINE, CARRIAGE_RETURN, tcl_string)
        if re.search(r"[{}]", tmp_string):
            msg = "Curly brace detected in string; TCL requires this be escaped."
            raise ValueError(msg)
        return tmp_string

    def __enter__(self) -> "InLineTransfer":
        self._enter_tcl_mode()
        return self

    def __exit__(
        self,
        exc_type: Optional[Type[BaseException]],
        exc_value: Optional[BaseException],
        traceback: Optional[TracebackType],
    ) -> None:
        self._exit_tcl_mode()

    def _enter_tcl_mode(self) -> str:
        TCL_ENTER = "tclsh"
        cmd_failed = ['Translating "tclsh"', "% Unknown command", "% Bad IP address"]
        output = self.ssh_ctl_chan._send_command_str(
            TCL_ENTER,
            expect_string=r"\(tcl\)#",
            strip_prompt=False,
            strip_command=False,
        )
        for pattern in cmd_failed:
            if pattern in output:
                raise ValueError(f"Failed to enter tclsh mode on router: {output}")
        return output

    def _exit_tcl_mode(self) -> str:
        TCL_EXIT = "tclquit"
        self.ssh_ctl_chan.write_channel("\r")
        time.sleep(1)
        output = self.ssh_ctl_chan.read_channel()
        if "(tcl)" in output:
            self.ssh_ctl_chan.write_channel(TCL_EXIT + "\r")
        time.sleep(1)
        output += self.ssh_ctl_chan.read_channel()
        return output

    def establish_scp_conn(self) -> None:
        raise NotImplementedError

    def close_scp_chan(self) -> None:
        raise NotImplementedError

    def local_space_available(self) -> bool:
        raise NotImplementedError

    def file_md5(self, file_name: str, add_newline: bool = False) -> str:
        """Compute MD5 hash of file."""
        if add_newline is True:
            raise ValueError(
                "add_newline argument is not supported for inline transfers."
            )
        file_contents = self._read_file(file_name)
        file_contents = file_contents + "\n"  # Cisco IOS automatically adds this
        file_contents_bytes = file_contents.encode("UTF-8")
        return hashlib.md5(file_contents_bytes).hexdigest()

    def config_md5(self, source_config: str) -> str:
        """Compute MD5 hash of text."""
        file_contents = source_config + "\n"  # Cisco IOS automatically adds this
        file_contents_bytes = file_contents.encode("UTF-8")
        return hashlib.md5(file_contents_bytes).hexdigest()

    def put_file(self) -> None:
        curlybrace = r"{"
        TCL_FILECMD_ENTER = 'puts [open "{}{}" w+] {}'.format(
            self.file_system, self.dest_file, curlybrace
        )
        TCL_FILECMD_EXIT = "}"

        if self.source_file:
            file_contents = self._read_file(self.source_file)
        elif self.source_config:
            file_contents = self.source_config
        file_contents = self._tcl_newline_rationalize(file_contents)

        # Try to remove any existing data
        self.ssh_ctl_chan.clear_buffer()

        self.ssh_ctl_chan.write_channel(TCL_FILECMD_ENTER)
        time.sleep(0.25)
        self.ssh_ctl_chan.write_channel(file_contents)
        self.ssh_ctl_chan.write_channel(TCL_FILECMD_EXIT + "\r")

        # This operation can be slow (depends on the size of the file)
        read_timeout = 100
        sleep_time = 4
        if self.file_size >= 2500:
            read_timeout = 300
            sleep_time = 12
        elif self.file_size >= 7500:
            read_timeout = 600
            sleep_time = 25

        # Initial delay
        time.sleep(sleep_time)

        # File paste and TCL_FILECMD_exit should be indicated by "router(tcl)#"
        output = self.ssh_ctl_chan.read_until_pattern(
            pattern=r"\(tcl\).*$", re_flags=re.M, read_timeout=read_timeout
        )

        # The file doesn't write until tclquit
        TCL_EXIT = "tclquit"
        self.ssh_ctl_chan.write_channel(TCL_EXIT + "\r")

        time.sleep(1)
        # Read all data remaining from the TCLSH session
        pattern = rf"tclquit.*{self.ssh_ctl_chan.base_prompt}.*$"
        re_flags = re.DOTALL | re.M
        output += self.ssh_ctl_chan.read_until_pattern(
            pattern=pattern, re_flags=re_flags, read_timeout=read_timeout
        )
        return None

    def get_file(self) -> None:
        raise NotImplementedError

    def enable_scp(self, cmd: str = "") -> None:
        raise NotImplementedError

    def disable_scp(self, cmd: str = "") -> None:
        raise NotImplementedError

Classes

class CiscoIosBase (ip: str = '', host: str = '', username: str = '', password: Optional[str] = None, secret: str = '', port: Optional[int] = None, device_type: str = '', verbose: bool = False, global_delay_factor: float = 1.0, global_cmd_verify: Optional[bool] = None, use_keys: bool = False, key_file: Optional[str] = None, pkey: Optional[paramiko.pkey.PKey] = None, passphrase: Optional[str] = None, disabled_algorithms: Optional[Dict[str, Any]] = None, disable_sha2_fix: bool = False, allow_agent: bool = False, ssh_strict: bool = False, system_host_keys: bool = False, alt_host_keys: bool = False, alt_key_file: str = '', ssh_config_file: Optional[str] = None, conn_timeout: int = 10, auth_timeout: Optional[int] = None, banner_timeout: int = 15, blocking_timeout: int = 20, timeout: int = 100, session_timeout: int = 60, read_timeout_override: Optional[float] = None, keepalive: int = 0, default_enter: Optional[str] = None, response_return: Optional[str] = None, serial_settings: Optional[Dict[str, Any]] = None, fast_cli: bool = True, session_log: Optional[SessionLog] = None, session_log_record_writes: bool = False, session_log_file_mode: str = 'write', allow_auto_change: bool = False, encoding: str = 'utf-8', sock: Optional[socket.socket] = None, sock_telnet: Optional[Dict[str, Any]] = None, auto_connect: bool = True, delay_factor_compat: bool = False, disable_lf_normalization: bool = False)

Common Methods for IOS (both SSH and telnet).

    Initialize attributes for establishing connection to target device.

    :param ip: IP address of target device. Not required if <code>host</code> is
        provided.

    :param host: Hostname of target device. Not required if <code>ip</code> is
            provided.

    :param username: Username to authenticate against target device if
            required.

    :param password: Password to authenticate against target device if
            required.

    :param secret: The enable password if target device requires one.

    :param port: The destination port used to connect to the target
            device.

    :param device_type: Class selection based on device type.

    :param verbose: Enable additional messages to standard output.

    :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1).

    :param use_keys: Connect to target device using SSH keys.

    :param key_file: Filename path of the SSH key file to use.

    :param pkey: SSH key object to use.

    :param passphrase: Passphrase to use for encrypted key; password will be used for key
            decryption if not specified.

    :param disabled_algorithms: Dictionary of SSH algorithms to disable. Refer to the Paramiko
            documentation for a description of the expected format.

    :param disable_sha2_fix: Boolean that fixes Paramiko issue with missing server-sig-algs
        <https://github.com/paramiko/paramiko/issues/1961> (default: False)

    :param allow_agent: Enable use of SSH key-agent.

    :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which
            means unknown SSH host keys will be accepted).

    :param system_host_keys: Load host keys from the users known_hosts file.

    :param alt_host_keys: If <code>True</code> host keys will be loaded from the file specified in
            alt_key_file.

    :param alt_key_file: SSH host key file to use (if alt_host_keys=True).

    :param ssh_config_file: File name of OpenSSH configuration file.

    :param conn_timeout: TCP connection timeout.

    :param session_timeout: Set a timeout for parallel requests.

    :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response.

    :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko).

    :param read_timeout_override: Set a timeout that will override the default read_timeout
            of both send_command and send_command_timing. This is useful for 3rd party
            libraries where directly accessing method arguments might be impractical.

    :param keepalive: Send SSH keepalive packets at a specific interval, in seconds.
            Currently defaults to 0, for backwards compatibility (it will not attempt
            to keep the connection alive).

    :param default_enter: Character(s) to send to correspond to enter key (default:

).

    :param response_return: Character(s) to use in normalized return data to represent
            enter key (default:

)

    :param serial_settings: Dictionary of settings for use with serial port (pySerial).

    :param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor
            to select smallest of global and specific. Sets default global_delay_factor to .1
            (default: True)

    :param session_log: File path, SessionLog object, or BufferedIOBase subclass object
            to write the session log to.

    :param session_log_record_writes: The session log generally only records channel reads due
            to eliminate command duplication due to command echo. You can enable this if you
            want to record both channel reads and channel writes in the log (default: False).

    :param session_log_file_mode: "write" or "append" for session_log file mode
            (default: "write")

    :param allow_auto_change: Allow automatic configuration changes for terminal settings.
            (default: False)

    :param encoding: Encoding to be used when writing bytes to the output channel.
            (default: "utf-8")

    :param sock: An open socket or socket-like object (such as a <code>.Channel</code>) to use for
            communication to the target host (default: None).

    :param sock_telnet: A dictionary of telnet socket parameters (SOCKS proxy). See
            telnet_proxy.py code for details.

    :param global_cmd_verify: Control whether command echo verification is enabled or disabled
            (default: None). Global attribute takes precedence over function <code>cmd\_verify</code>
            argument. Value of <code>None</code> indicates to use function <code>cmd\_verify</code> argument.

    :param auto_connect: Control whether Netmiko automatically establishes the connection as
            part of the object creation (default: True).

    :param delay_factor_compat: Set send_command and send_command_timing back to using Netmiko
            3.x behavior for delay_factor/global_delay_factor/max_loops. This argument will be
            eliminated in Netmiko 5.x (default: False).

    :param disable_lf_normalization: Disable Netmiko's linefeed normalization behavior
            (default: False)
Expand source code 
class CiscoIosBase(CiscoBaseConnection):
    """Common Methods for IOS (both SSH and telnet)."""

    def session_preparation(self) -> None:
        """Prepare the session after the connection has been established."""
        cmd = "terminal width 511"
        self.set_terminal_width(command=cmd, pattern=cmd)
        self.disable_paging()
        self.set_base_prompt()

    def set_base_prompt(
        self,
        pri_prompt_terminator: str = "#",
        alt_prompt_terminator: str = ">",
        delay_factor: float = 1.0,
        pattern: Optional[str] = None,
    ) -> str:
        """
        Cisco IOS/IOS-XE abbreviates the prompt at 20-chars in config mode.

        Consequently, abbreviate the base_prompt
        """
        base_prompt = super().set_base_prompt(
            pri_prompt_terminator=pri_prompt_terminator,
            alt_prompt_terminator=alt_prompt_terminator,
            delay_factor=delay_factor,
            pattern=pattern,
        )
        self.base_prompt = base_prompt[:16]
        return self.base_prompt

    def check_config_mode(
        self,
        check_string: str = ")#",
        pattern: str = r"[>#]",
        force_regex: bool = False,
    ) -> bool:
        """
        Checks if the device is in configuration mode or not.

        Cisco IOS devices abbreviate the prompt at 20 chars in config mode
        """
        return super().check_config_mode(check_string=check_string, pattern=pattern)

    def save_config(
        self, cmd: str = "write mem", confirm: bool = False, confirm_response: str = ""
    ) -> str:
        """Saves Config Using Copy Run Start"""
        return super().save_config(
            cmd=cmd, confirm=confirm, confirm_response=confirm_response
        )

Ancestors

Subclasses

Methods

def check_config_mode(self, check_string: str = ')#', pattern: str = '[>#]', force_regex: bool = False) ‑> bool

Checks if the device is in configuration mode or not.

Cisco IOS devices abbreviate the prompt at 20 chars in config mode

Expand source code 
def check_config_mode(
    self,
    check_string: str = ")#",
    pattern: str = r"[>#]",
    force_regex: bool = False,
) -> bool:
    """
    Checks if the device is in configuration mode or not.

    Cisco IOS devices abbreviate the prompt at 20 chars in config mode
    """
    return super().check_config_mode(check_string=check_string, pattern=pattern)
def save_config(self, cmd: str = 'write mem', confirm: bool = False, confirm_response: str = '') ‑> str

Saves Config Using Copy Run Start

Expand source code 
def save_config(
    self, cmd: str = "write mem", confirm: bool = False, confirm_response: str = ""
) -> str:
    """Saves Config Using Copy Run Start"""
    return super().save_config(
        cmd=cmd, confirm=confirm, confirm_response=confirm_response
    )
def session_preparation(self) ‑> None

Prepare the session after the connection has been established.

Expand source code 
def session_preparation(self) -> None:
    """Prepare the session after the connection has been established."""
    cmd = "terminal width 511"
    self.set_terminal_width(command=cmd, pattern=cmd)
    self.disable_paging()
    self.set_base_prompt()
def set_base_prompt(self, pri_prompt_terminator: str = '#', alt_prompt_terminator: str = '>', delay_factor: float = 1.0, pattern: Optional[str] = None) ‑> str

Cisco IOS/IOS-XE abbreviates the prompt at 20-chars in config mode.

Consequently, abbreviate the base_prompt

Expand source code 
def set_base_prompt(
    self,
    pri_prompt_terminator: str = "#",
    alt_prompt_terminator: str = ">",
    delay_factor: float = 1.0,
    pattern: Optional[str] = None,
) -> str:
    """
    Cisco IOS/IOS-XE abbreviates the prompt at 20-chars in config mode.

    Consequently, abbreviate the base_prompt
    """
    base_prompt = super().set_base_prompt(
        pri_prompt_terminator=pri_prompt_terminator,
        alt_prompt_terminator=alt_prompt_terminator,
        delay_factor=delay_factor,
        pattern=pattern,
    )
    self.base_prompt = base_prompt[:16]
    return self.base_prompt

Inherited members

class CiscoIosFileTransfer (ssh_conn: BaseConnection, source_file: str, dest_file: str, file_system: Optional[str] = None, direction: str = 'put', socket_timeout: float = 10.0, progress: Optional[Callable[..., Any]] = None, progress4: Optional[Callable[..., Any]] = None, hash_supported: bool = True)

Cisco IOS SCP File Transfer driver.

Expand source code 
class CiscoIosFileTransfer(CiscoFileTransfer):
    """Cisco IOS SCP File Transfer driver."""

    pass

Ancestors

Subclasses

Inherited members

class CiscoIosSSH (ip: str = '', host: str = '', username: str = '', password: Optional[str] = None, secret: str = '', port: Optional[int] = None, device_type: str = '', verbose: bool = False, global_delay_factor: float = 1.0, global_cmd_verify: Optional[bool] = None, use_keys: bool = False, key_file: Optional[str] = None, pkey: Optional[paramiko.pkey.PKey] = None, passphrase: Optional[str] = None, disabled_algorithms: Optional[Dict[str, Any]] = None, disable_sha2_fix: bool = False, allow_agent: bool = False, ssh_strict: bool = False, system_host_keys: bool = False, alt_host_keys: bool = False, alt_key_file: str = '', ssh_config_file: Optional[str] = None, conn_timeout: int = 10, auth_timeout: Optional[int] = None, banner_timeout: int = 15, blocking_timeout: int = 20, timeout: int = 100, session_timeout: int = 60, read_timeout_override: Optional[float] = None, keepalive: int = 0, default_enter: Optional[str] = None, response_return: Optional[str] = None, serial_settings: Optional[Dict[str, Any]] = None, fast_cli: bool = True, session_log: Optional[SessionLog] = None, session_log_record_writes: bool = False, session_log_file_mode: str = 'write', allow_auto_change: bool = False, encoding: str = 'utf-8', sock: Optional[socket.socket] = None, sock_telnet: Optional[Dict[str, Any]] = None, auto_connect: bool = True, delay_factor_compat: bool = False, disable_lf_normalization: bool = False)

Cisco IOS SSH driver.

    Initialize attributes for establishing connection to target device.

    :param ip: IP address of target device. Not required if <code>host</code> is
        provided.

    :param host: Hostname of target device. Not required if <code>ip</code> is
            provided.

    :param username: Username to authenticate against target device if
            required.

    :param password: Password to authenticate against target device if
            required.

    :param secret: The enable password if target device requires one.

    :param port: The destination port used to connect to the target
            device.

    :param device_type: Class selection based on device type.

    :param verbose: Enable additional messages to standard output.

    :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1).

    :param use_keys: Connect to target device using SSH keys.

    :param key_file: Filename path of the SSH key file to use.

    :param pkey: SSH key object to use.

    :param passphrase: Passphrase to use for encrypted key; password will be used for key
            decryption if not specified.

    :param disabled_algorithms: Dictionary of SSH algorithms to disable. Refer to the Paramiko
            documentation for a description of the expected format.

    :param disable_sha2_fix: Boolean that fixes Paramiko issue with missing server-sig-algs
        <https://github.com/paramiko/paramiko/issues/1961> (default: False)

    :param allow_agent: Enable use of SSH key-agent.

    :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which
            means unknown SSH host keys will be accepted).

    :param system_host_keys: Load host keys from the users known_hosts file.

    :param alt_host_keys: If <code>True</code> host keys will be loaded from the file specified in
            alt_key_file.

    :param alt_key_file: SSH host key file to use (if alt_host_keys=True).

    :param ssh_config_file: File name of OpenSSH configuration file.

    :param conn_timeout: TCP connection timeout.

    :param session_timeout: Set a timeout for parallel requests.

    :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response.

    :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko).

    :param read_timeout_override: Set a timeout that will override the default read_timeout
            of both send_command and send_command_timing. This is useful for 3rd party
            libraries where directly accessing method arguments might be impractical.

    :param keepalive: Send SSH keepalive packets at a specific interval, in seconds.
            Currently defaults to 0, for backwards compatibility (it will not attempt
            to keep the connection alive).

    :param default_enter: Character(s) to send to correspond to enter key (default:

).

    :param response_return: Character(s) to use in normalized return data to represent
            enter key (default:

)

    :param serial_settings: Dictionary of settings for use with serial port (pySerial).

    :param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor
            to select smallest of global and specific. Sets default global_delay_factor to .1
            (default: True)

    :param session_log: File path, SessionLog object, or BufferedIOBase subclass object
            to write the session log to.

    :param session_log_record_writes: The session log generally only records channel reads due
            to eliminate command duplication due to command echo. You can enable this if you
            want to record both channel reads and channel writes in the log (default: False).

    :param session_log_file_mode: "write" or "append" for session_log file mode
            (default: "write")

    :param allow_auto_change: Allow automatic configuration changes for terminal settings.
            (default: False)

    :param encoding: Encoding to be used when writing bytes to the output channel.
            (default: "utf-8")

    :param sock: An open socket or socket-like object (such as a <code>.Channel</code>) to use for
            communication to the target host (default: None).

    :param sock_telnet: A dictionary of telnet socket parameters (SOCKS proxy). See
            telnet_proxy.py code for details.

    :param global_cmd_verify: Control whether command echo verification is enabled or disabled
            (default: None). Global attribute takes precedence over function <code>cmd\_verify</code>
            argument. Value of <code>None</code> indicates to use function <code>cmd\_verify</code> argument.

    :param auto_connect: Control whether Netmiko automatically establishes the connection as
            part of the object creation (default: True).

    :param delay_factor_compat: Set send_command and send_command_timing back to using Netmiko
            3.x behavior for delay_factor/global_delay_factor/max_loops. This argument will be
            eliminated in Netmiko 5.x (default: False).

    :param disable_lf_normalization: Disable Netmiko's linefeed normalization behavior
            (default: False)
Expand source code 
class CiscoIosSSH(CiscoIosBase):
    """Cisco IOS SSH driver."""

    pass

Ancestors

Inherited members

class CiscoIosSerial (ip: str = '', host: str = '', username: str = '', password: Optional[str] = None, secret: str = '', port: Optional[int] = None, device_type: str = '', verbose: bool = False, global_delay_factor: float = 1.0, global_cmd_verify: Optional[bool] = None, use_keys: bool = False, key_file: Optional[str] = None, pkey: Optional[paramiko.pkey.PKey] = None, passphrase: Optional[str] = None, disabled_algorithms: Optional[Dict[str, Any]] = None, disable_sha2_fix: bool = False, allow_agent: bool = False, ssh_strict: bool = False, system_host_keys: bool = False, alt_host_keys: bool = False, alt_key_file: str = '', ssh_config_file: Optional[str] = None, conn_timeout: int = 10, auth_timeout: Optional[int] = None, banner_timeout: int = 15, blocking_timeout: int = 20, timeout: int = 100, session_timeout: int = 60, read_timeout_override: Optional[float] = None, keepalive: int = 0, default_enter: Optional[str] = None, response_return: Optional[str] = None, serial_settings: Optional[Dict[str, Any]] = None, fast_cli: bool = True, session_log: Optional[SessionLog] = None, session_log_record_writes: bool = False, session_log_file_mode: str = 'write', allow_auto_change: bool = False, encoding: str = 'utf-8', sock: Optional[socket.socket] = None, sock_telnet: Optional[Dict[str, Any]] = None, auto_connect: bool = True, delay_factor_compat: bool = False, disable_lf_normalization: bool = False)

Cisco IOS Serial driver.

    Initialize attributes for establishing connection to target device.

    :param ip: IP address of target device. Not required if <code>host</code> is
        provided.

    :param host: Hostname of target device. Not required if <code>ip</code> is
            provided.

    :param username: Username to authenticate against target device if
            required.

    :param password: Password to authenticate against target device if
            required.

    :param secret: The enable password if target device requires one.

    :param port: The destination port used to connect to the target
            device.

    :param device_type: Class selection based on device type.

    :param verbose: Enable additional messages to standard output.

    :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1).

    :param use_keys: Connect to target device using SSH keys.

    :param key_file: Filename path of the SSH key file to use.

    :param pkey: SSH key object to use.

    :param passphrase: Passphrase to use for encrypted key; password will be used for key
            decryption if not specified.

    :param disabled_algorithms: Dictionary of SSH algorithms to disable. Refer to the Paramiko
            documentation for a description of the expected format.

    :param disable_sha2_fix: Boolean that fixes Paramiko issue with missing server-sig-algs
        <https://github.com/paramiko/paramiko/issues/1961> (default: False)

    :param allow_agent: Enable use of SSH key-agent.

    :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which
            means unknown SSH host keys will be accepted).

    :param system_host_keys: Load host keys from the users known_hosts file.

    :param alt_host_keys: If <code>True</code> host keys will be loaded from the file specified in
            alt_key_file.

    :param alt_key_file: SSH host key file to use (if alt_host_keys=True).

    :param ssh_config_file: File name of OpenSSH configuration file.

    :param conn_timeout: TCP connection timeout.

    :param session_timeout: Set a timeout for parallel requests.

    :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response.

    :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko).

    :param read_timeout_override: Set a timeout that will override the default read_timeout
            of both send_command and send_command_timing. This is useful for 3rd party
            libraries where directly accessing method arguments might be impractical.

    :param keepalive: Send SSH keepalive packets at a specific interval, in seconds.
            Currently defaults to 0, for backwards compatibility (it will not attempt
            to keep the connection alive).

    :param default_enter: Character(s) to send to correspond to enter key (default:

).

    :param response_return: Character(s) to use in normalized return data to represent
            enter key (default:

)

    :param serial_settings: Dictionary of settings for use with serial port (pySerial).

    :param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor
            to select smallest of global and specific. Sets default global_delay_factor to .1
            (default: True)

    :param session_log: File path, SessionLog object, or BufferedIOBase subclass object
            to write the session log to.

    :param session_log_record_writes: The session log generally only records channel reads due
            to eliminate command duplication due to command echo. You can enable this if you
            want to record both channel reads and channel writes in the log (default: False).

    :param session_log_file_mode: "write" or "append" for session_log file mode
            (default: "write")

    :param allow_auto_change: Allow automatic configuration changes for terminal settings.
            (default: False)

    :param encoding: Encoding to be used when writing bytes to the output channel.
            (default: "utf-8")

    :param sock: An open socket or socket-like object (such as a <code>.Channel</code>) to use for
            communication to the target host (default: None).

    :param sock_telnet: A dictionary of telnet socket parameters (SOCKS proxy). See
            telnet_proxy.py code for details.

    :param global_cmd_verify: Control whether command echo verification is enabled or disabled
            (default: None). Global attribute takes precedence over function <code>cmd\_verify</code>
            argument. Value of <code>None</code> indicates to use function <code>cmd\_verify</code> argument.

    :param auto_connect: Control whether Netmiko automatically establishes the connection as
            part of the object creation (default: True).

    :param delay_factor_compat: Set send_command and send_command_timing back to using Netmiko
            3.x behavior for delay_factor/global_delay_factor/max_loops. This argument will be
            eliminated in Netmiko 5.x (default: False).

    :param disable_lf_normalization: Disable Netmiko's linefeed normalization behavior
            (default: False)
Expand source code 
class CiscoIosSerial(CiscoIosBase):
    """Cisco IOS Serial driver."""

    pass

Ancestors

Inherited members

class CiscoIosTelnet (ip: str = '', host: str = '', username: str = '', password: Optional[str] = None, secret: str = '', port: Optional[int] = None, device_type: str = '', verbose: bool = False, global_delay_factor: float = 1.0, global_cmd_verify: Optional[bool] = None, use_keys: bool = False, key_file: Optional[str] = None, pkey: Optional[paramiko.pkey.PKey] = None, passphrase: Optional[str] = None, disabled_algorithms: Optional[Dict[str, Any]] = None, disable_sha2_fix: bool = False, allow_agent: bool = False, ssh_strict: bool = False, system_host_keys: bool = False, alt_host_keys: bool = False, alt_key_file: str = '', ssh_config_file: Optional[str] = None, conn_timeout: int = 10, auth_timeout: Optional[int] = None, banner_timeout: int = 15, blocking_timeout: int = 20, timeout: int = 100, session_timeout: int = 60, read_timeout_override: Optional[float] = None, keepalive: int = 0, default_enter: Optional[str] = None, response_return: Optional[str] = None, serial_settings: Optional[Dict[str, Any]] = None, fast_cli: bool = True, session_log: Optional[SessionLog] = None, session_log_record_writes: bool = False, session_log_file_mode: str = 'write', allow_auto_change: bool = False, encoding: str = 'utf-8', sock: Optional[socket.socket] = None, sock_telnet: Optional[Dict[str, Any]] = None, auto_connect: bool = True, delay_factor_compat: bool = False, disable_lf_normalization: bool = False)

Cisco IOS Telnet driver.

    Initialize attributes for establishing connection to target device.

    :param ip: IP address of target device. Not required if <code>host</code> is
        provided.

    :param host: Hostname of target device. Not required if <code>ip</code> is
            provided.

    :param username: Username to authenticate against target device if
            required.

    :param password: Password to authenticate against target device if
            required.

    :param secret: The enable password if target device requires one.

    :param port: The destination port used to connect to the target
            device.

    :param device_type: Class selection based on device type.

    :param verbose: Enable additional messages to standard output.

    :param global_delay_factor: Multiplication factor affecting Netmiko delays (default: 1).

    :param use_keys: Connect to target device using SSH keys.

    :param key_file: Filename path of the SSH key file to use.

    :param pkey: SSH key object to use.

    :param passphrase: Passphrase to use for encrypted key; password will be used for key
            decryption if not specified.

    :param disabled_algorithms: Dictionary of SSH algorithms to disable. Refer to the Paramiko
            documentation for a description of the expected format.

    :param disable_sha2_fix: Boolean that fixes Paramiko issue with missing server-sig-algs
        <https://github.com/paramiko/paramiko/issues/1961> (default: False)

    :param allow_agent: Enable use of SSH key-agent.

    :param ssh_strict: Automatically reject unknown SSH host keys (default: False, which
            means unknown SSH host keys will be accepted).

    :param system_host_keys: Load host keys from the users known_hosts file.

    :param alt_host_keys: If <code>True</code> host keys will be loaded from the file specified in
            alt_key_file.

    :param alt_key_file: SSH host key file to use (if alt_host_keys=True).

    :param ssh_config_file: File name of OpenSSH configuration file.

    :param conn_timeout: TCP connection timeout.

    :param session_timeout: Set a timeout for parallel requests.

    :param auth_timeout: Set a timeout (in seconds) to wait for an authentication response.

    :param banner_timeout: Set a timeout to wait for the SSH banner (pass to Paramiko).

    :param read_timeout_override: Set a timeout that will override the default read_timeout
            of both send_command and send_command_timing. This is useful for 3rd party
            libraries where directly accessing method arguments might be impractical.

    :param keepalive: Send SSH keepalive packets at a specific interval, in seconds.
            Currently defaults to 0, for backwards compatibility (it will not attempt
            to keep the connection alive).

    :param default_enter: Character(s) to send to correspond to enter key (default:

).

    :param response_return: Character(s) to use in normalized return data to represent
            enter key (default:

)

    :param serial_settings: Dictionary of settings for use with serial port (pySerial).

    :param fast_cli: Provide a way to optimize for performance. Converts select_delay_factor
            to select smallest of global and specific. Sets default global_delay_factor to .1
            (default: True)

    :param session_log: File path, SessionLog object, or BufferedIOBase subclass object
            to write the session log to.

    :param session_log_record_writes: The session log generally only records channel reads due
            to eliminate command duplication due to command echo. You can enable this if you
            want to record both channel reads and channel writes in the log (default: False).

    :param session_log_file_mode: "write" or "append" for session_log file mode
            (default: "write")

    :param allow_auto_change: Allow automatic configuration changes for terminal settings.
            (default: False)

    :param encoding: Encoding to be used when writing bytes to the output channel.
            (default: "utf-8")

    :param sock: An open socket or socket-like object (such as a <code>.Channel</code>) to use for
            communication to the target host (default: None).

    :param sock_telnet: A dictionary of telnet socket parameters (SOCKS proxy). See
            telnet_proxy.py code for details.

    :param global_cmd_verify: Control whether command echo verification is enabled or disabled
            (default: None). Global attribute takes precedence over function <code>cmd\_verify</code>
            argument. Value of <code>None</code> indicates to use function <code>cmd\_verify</code> argument.

    :param auto_connect: Control whether Netmiko automatically establishes the connection as
            part of the object creation (default: True).

    :param delay_factor_compat: Set send_command and send_command_timing back to using Netmiko
            3.x behavior for delay_factor/global_delay_factor/max_loops. This argument will be
            eliminated in Netmiko 5.x (default: False).

    :param disable_lf_normalization: Disable Netmiko's linefeed normalization behavior
            (default: False)
Expand source code 
class CiscoIosTelnet(CiscoIosBase):
    """Cisco IOS Telnet driver."""

    pass

Ancestors

Inherited members

class InLineTransfer (ssh_conn: BaseConnection, source_file: str = '', dest_file: str = '', file_system: Optional[str] = None, direction: str = 'put', source_config: Optional[str] = None, socket_timeout: float = 10.0, progress: Optional[Callable[..., Any]] = None, progress4: Optional[Callable[..., Any]] = None, hash_supported: bool = True)

Use TCL on Cisco IOS to directly transfer file.

Expand source code 
class InLineTransfer(CiscoIosFileTransfer):
    """Use TCL on Cisco IOS to directly transfer file."""

    def __init__(
        self,
        ssh_conn: BaseConnection,
        source_file: str = "",
        dest_file: str = "",
        file_system: Optional[str] = None,
        direction: str = "put",
        source_config: Optional[str] = None,
        socket_timeout: float = 10.0,
        progress: Optional[Callable[..., Any]] = None,
        progress4: Optional[Callable[..., Any]] = None,
        hash_supported: bool = True,
    ) -> None:

        if not dest_file:
            raise ValueError(
                "Destination file must be specified for InlineTransfer operations."
            )
        if hash_supported is False:
            raise ValueError("hash_supported=False is not supported for InLineTransfer")

        if source_file and source_config:
            msg = "Invalid call to InLineTransfer both source_file and source_config specified."
            raise ValueError(msg)
        if direction != "put":
            raise ValueError("Only put operation supported by InLineTransfer.")

        if progress is not None or progress4 is not None:
            raise NotImplementedError(
                "Progress bar is not supported on inline transfers."
            )
        else:
            self.progress = progress
            self.progress4 = progress4

        self.ssh_ctl_chan = ssh_conn
        self.source_file = source_file
        if source_file:
            self.source_config = None
            self.source_md5 = self.file_md5(source_file)
            self.file_size = os.stat(source_file).st_size
        elif source_config:
            self.source_config = source_config
            self.source_md5 = self.config_md5(source_config)
            self.file_size = len(source_config.encode("UTF-8"))
        self.dest_file = dest_file
        self.direction = direction

        if not file_system:
            self.file_system = self.ssh_ctl_chan._autodetect_fs()
        else:
            self.file_system = file_system

        self.socket_timeout = socket_timeout

    @staticmethod
    def _read_file(file_name: str) -> str:
        with io.open(file_name, "rt", encoding="utf-8") as f:
            return f.read()

    @staticmethod
    def _tcl_newline_rationalize(tcl_string: str) -> str:
        r"""
        When using put inside a TCL {} section the newline is considered a new TCL
        statement and causes a missing curly-brace message. Convert "\n" to "\r". TCL
        will convert the "\r" to a "\n" i.e. you will see a "\n" inside the file on the
        Cisco IOS device.
        """
        NEWLINE = r"\n"
        CARRIAGE_RETURN = r"\r"
        tmp_string = re.sub(NEWLINE, CARRIAGE_RETURN, tcl_string)
        if re.search(r"[{}]", tmp_string):
            msg = "Curly brace detected in string; TCL requires this be escaped."
            raise ValueError(msg)
        return tmp_string

    def __enter__(self) -> "InLineTransfer":
        self._enter_tcl_mode()
        return self

    def __exit__(
        self,
        exc_type: Optional[Type[BaseException]],
        exc_value: Optional[BaseException],
        traceback: Optional[TracebackType],
    ) -> None:
        self._exit_tcl_mode()

    def _enter_tcl_mode(self) -> str:
        TCL_ENTER = "tclsh"
        cmd_failed = ['Translating "tclsh"', "% Unknown command", "% Bad IP address"]
        output = self.ssh_ctl_chan._send_command_str(
            TCL_ENTER,
            expect_string=r"\(tcl\)#",
            strip_prompt=False,
            strip_command=False,
        )
        for pattern in cmd_failed:
            if pattern in output:
                raise ValueError(f"Failed to enter tclsh mode on router: {output}")
        return output

    def _exit_tcl_mode(self) -> str:
        TCL_EXIT = "tclquit"
        self.ssh_ctl_chan.write_channel("\r")
        time.sleep(1)
        output = self.ssh_ctl_chan.read_channel()
        if "(tcl)" in output:
            self.ssh_ctl_chan.write_channel(TCL_EXIT + "\r")
        time.sleep(1)
        output += self.ssh_ctl_chan.read_channel()
        return output

    def establish_scp_conn(self) -> None:
        raise NotImplementedError

    def close_scp_chan(self) -> None:
        raise NotImplementedError

    def local_space_available(self) -> bool:
        raise NotImplementedError

    def file_md5(self, file_name: str, add_newline: bool = False) -> str:
        """Compute MD5 hash of file."""
        if add_newline is True:
            raise ValueError(
                "add_newline argument is not supported for inline transfers."
            )
        file_contents = self._read_file(file_name)
        file_contents = file_contents + "\n"  # Cisco IOS automatically adds this
        file_contents_bytes = file_contents.encode("UTF-8")
        return hashlib.md5(file_contents_bytes).hexdigest()

    def config_md5(self, source_config: str) -> str:
        """Compute MD5 hash of text."""
        file_contents = source_config + "\n"  # Cisco IOS automatically adds this
        file_contents_bytes = file_contents.encode("UTF-8")
        return hashlib.md5(file_contents_bytes).hexdigest()

    def put_file(self) -> None:
        curlybrace = r"{"
        TCL_FILECMD_ENTER = 'puts [open "{}{}" w+] {}'.format(
            self.file_system, self.dest_file, curlybrace
        )
        TCL_FILECMD_EXIT = "}"

        if self.source_file:
            file_contents = self._read_file(self.source_file)
        elif self.source_config:
            file_contents = self.source_config
        file_contents = self._tcl_newline_rationalize(file_contents)

        # Try to remove any existing data
        self.ssh_ctl_chan.clear_buffer()

        self.ssh_ctl_chan.write_channel(TCL_FILECMD_ENTER)
        time.sleep(0.25)
        self.ssh_ctl_chan.write_channel(file_contents)
        self.ssh_ctl_chan.write_channel(TCL_FILECMD_EXIT + "\r")

        # This operation can be slow (depends on the size of the file)
        read_timeout = 100
        sleep_time = 4
        if self.file_size >= 2500:
            read_timeout = 300
            sleep_time = 12
        elif self.file_size >= 7500:
            read_timeout = 600
            sleep_time = 25

        # Initial delay
        time.sleep(sleep_time)

        # File paste and TCL_FILECMD_exit should be indicated by "router(tcl)#"
        output = self.ssh_ctl_chan.read_until_pattern(
            pattern=r"\(tcl\).*$", re_flags=re.M, read_timeout=read_timeout
        )

        # The file doesn't write until tclquit
        TCL_EXIT = "tclquit"
        self.ssh_ctl_chan.write_channel(TCL_EXIT + "\r")

        time.sleep(1)
        # Read all data remaining from the TCLSH session
        pattern = rf"tclquit.*{self.ssh_ctl_chan.base_prompt}.*$"
        re_flags = re.DOTALL | re.M
        output += self.ssh_ctl_chan.read_until_pattern(
            pattern=pattern, re_flags=re_flags, read_timeout=read_timeout
        )
        return None

    def get_file(self) -> None:
        raise NotImplementedError

    def enable_scp(self, cmd: str = "") -> None:
        raise NotImplementedError

    def disable_scp(self, cmd: str = "") -> None:
        raise NotImplementedError

Ancestors

Methods

def config_md5(self, source_config: str) ‑> str

Compute MD5 hash of text.

Expand source code 
def config_md5(self, source_config: str) -> str:
    """Compute MD5 hash of text."""
    file_contents = source_config + "\n"  # Cisco IOS automatically adds this
    file_contents_bytes = file_contents.encode("UTF-8")
    return hashlib.md5(file_contents_bytes).hexdigest()
def file_md5(self, file_name: str, add_newline: bool = False) ‑> str

Compute MD5 hash of file.

Expand source code 
def file_md5(self, file_name: str, add_newline: bool = False) -> str:
    """Compute MD5 hash of file."""
    if add_newline is True:
        raise ValueError(
            "add_newline argument is not supported for inline transfers."
        )
    file_contents = self._read_file(file_name)
    file_contents = file_contents + "\n"  # Cisco IOS automatically adds this
    file_contents_bytes = file_contents.encode("UTF-8")
    return hashlib.md5(file_contents_bytes).hexdigest()

Inherited members